5 Steps to setting up a keyboard on a mount

Guest Editor | Debra Vogel

Quickly and Easily Attach a Keyboard to a Mount by Following These Easy 5 Steps



Finding the best accessories to pair with your tablet can sometimes be a challenge. As workforces become more mobile the need to have access to a keyboard becomes more prominent. So we developed a mount that can be added to any of our mounts that will hold a keyboard. The Pole Mount can be used with a MagConnect Tablet Module or Unite Tray making it easy to add it to any existing or new mount setup.

The MagConnect Universal Tablet Module paired with a MagConnect Pole Mount is a great option. The module attaches to the back of a keyboard via an industrial grade 3M VHB adhesive. This industrial grade adhesive is semi-permanent and can be removed but requires a solvent to do so. This is a great solution for when a keyboard needs to be quickly mounted and dismounted while on the go.

The other keyboard mount option is the Unite Pole Mount; which can hold a keyboard between 5.125” – 7.625” in width and 7.5” – 12” in length. This mount has adjustable brackets that slide in and out of the tray to accommodate tablets and various other accessories like a keyboard. This is the ideal solution for shared workstations that utilize multiple types of keyboards.

After you’ve decided which mounting option to go with follow the below step-by-step instructions on how to setup a keyboard mount utilizing one of our MagConnect or Unite Mounts. If you're still on the fence about which mount and case combo to settle on this blog post will help you examine the options to help you land on the best solution to fit your needs and environment. 

Step 1: Select the correct insert

Determine which insert best fits your mount arm diameter. Then slide the insert around the mount arm where you wish to mount your keyboard.




Step 2: Attach the pole mount bracket

Place the pole mount base top and bottom around the insert and tighten using the included screws and allen wrench. Tighten enough to prevent the base from sliding up and down on the arm.



Step 3: Secure the pole mount arm to the base

Loosen the thumbscrew at the mount arm base connection enough to allow the ball joint to fit into the arm brackets. Once installed retighten thumbscrew.



Step 4: Attach the keyboard to the MagConnect Universal Tablet Module or Unite Tray

MagConnect Universal Tablet Module – Clean the mounting surface of the keyboard and adhere the 3M adhesive to the keyboard making sure it is centered. To ensure proper adhesion press the module firmly against the keyboard then allow adhesive to cure.



Unite – Loosen the thumbscrews to position brackets around keyboard edges then retighten.



Step 5: Attach to mount

MagConnect – Attach to the keyboard to the mount via the MagConnect ball joint. It will attach magnetically, but the connection should be reinforced using the red precision screw on the mount.



Unite – Loosen the remaining bracket and insert the Unite tray ball joint.




Now your keyboard tablet mount accessory is ready for use. Do you have questions about this setup or would you like to share your setup? Leave a comment for us below!


Older Post

Leave a comment

Please note, comments must be approved before they are published

Related Posts

What is OmniPose?
OmniPose combines usability and mobility into one unique design. This pa...
Read More
MagConnect Technology - tablet magnetic mounting system
This new generation of MagConnect technology is the innovative method to...
Read More
Healthcare Grade Antimicrobial Case
Healthcare Grade Antimicrobial Case
Healthcare Tablet Case Made for the Microsoft Surface Pro 6th / 5 / 4   ...
Read More